配置防火墙开通ipv6公网

• 光猫改桥接
• 用路由器拨号
• 路由器“在防火墙规则启动后执行”下列脚本

#!/bin/bash
# ip6tables single-host firewall script
# Define your command variables
ipt6="/sbin/ip6tables"
# Flush all rules and delete all chains
# for a clean startup
$ipt6 -F
$ipt6 -X 
# Zero out all counters
$ipt6 -Z
# Default policies: deny all incoming
# Unrestricted outgoing
$ipt6 -P INPUT DROP
$ipt6 -P FORWARD DROP
$ipt6 -P OUTPUT ACCEPT
# Must allow loopback interface
$ipt6 -A INPUT -i lo -j ACCEPT
# Reject connection attempts not initiated from the host
$ipt6 -A INPUT -p tcp --syn -j DROP
# Allow return connections initiated from the host
$ipt6 -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
# Accept all ICMP v6 packets
$ipt6 -A INPUT -p ipv6-icmp -j ACCEPT
# Optional rules to allow other LAN hosts access 
# to services. Delete $ipt6 -A INPUT -p tcp --syn -j DROP
# Allow DHCPv6 from LAN only
$ipt6 -A INPUT -m state --state NEW -m udp -p udp 
-s fe80::/10 --dport 546 -j ACCEPT
# Allow connections from SSH clients
$ipt6 -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
# Allow HTTP and HTTPS traffic 
$ipt6 -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
$ipt6 -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT
# Allow access to SMTP, POP3, and IMAP
$ipt -A INPUT -m state --state NEW -p tcp -m multiport 
--dport 25,110,143 -j ACCEPT

又或者：

ip6tables -F
ip6tables -X
ip6tables -P INPUT ACCEPT
ip6tables -P OUTPUT ACCEPT
ip6tables -P FORWARD ACCEPT